Beatbot AquaSense 2 Pro vs Beatbot AquaSense 2 Ultra
Both models on one scale, every figure traced to its manufacturer datasheet. Bar length means the same thing here as on every other page of the site.
- AquaSense 2 Pro
- AquaSense 2 Ultra
- Pool capacitymore is better
- 3,875sq ft3,875sq ft
- AquaSense 2 Pro: Recommended pool size (pool bottom area): 360 square meters (3,875 square feet)
- AquaSense 2 Ultra: Beatbot publishes a recommended pool size of 360 square meters (their own conversion: 3,875 square feet) per single cycle, stated on a Pool Bottom Area basis, not a total wetted-surface basis. Original published figure: 360 sq m.
- Runtimemore is better
- Not publishedNot published
- AquaSense 2 Pro: General cleaning runtime is not published; Beatbot publishes only an up-to-11-hours continuous surface cleaning claim, a different basis than a whole-pool runtime, so no comparable runtime figure exists
- AquaSense 2 Ultra: Beatbot publishes only mode-specific maximum runtimes, not a whole-pool runtime: up to 10 hours continuous runtime for surface cleaning, up to 5 hours for floor cleaning, and up to 4.5 hours for walls plus waterline cleaning. Each is a per-mode maximum on a different measurement basis than a whole-pool runtime, so no single comparable runtime figure is recorded. Battery: 13,400 mAh lithium ion.
- Flow ratemore is better
- 5,500GPH5,500GPH
- AquaSense 2 Pro: 5500 GPH is the highest rate tested in Beatbot's internal labs; real-world flow varies
- AquaSense 2 Ultra: Beatbot claims 5500 GPH suction. Manufacturer footnote states 5500GPH was the highest rate tested in Beatbot's internal labs and actual results may vary, so this is a peak internal lab figure, not a rated continuous flow.
- Filtration (finest layer)less is better
- 150µm150µm
- AquaSense 2 Pro: Two-layer filter (150um + 250um), captures particles as small as 150 micrometers; 3.7 L filter basket capacity
- AquaSense 2 Ultra: Dual filter baskets published as Larger Baskets: 150um plus 250um and Thinner Baskets: 250um; recorded value is the finest published rating (150um).
- Charge timeless is better
- 4.5hr4.5hr
- Warrantymore is better
- 3yr3yr
Neither maker publishes a comparable figure.
Beatbot AquaSense 2 Pro
A five-mode flagship that cleans floor, walls, waterline and surface, then parks itself at the waterline for easier retrieval. Built for large pools where full coverage matters more than price.
Best for large pools where full floor-walls-waterline-surface coverage matters.
Beatbot AquaSense 2 Ultra
Beatbot positions the AquaSense 2 Ultra as its top AquaSense 2 model, adding water-clarification and a 5-in-1 cleaning claim on top of floor, wall, waterline and surface coverage, with a claimed 5500 GPH pump and HybridSense AI navigation. Buyers should note that its headline runtimes are published per cleaning mode rather than as a single whole-pool figure, and its recommended pool size is stated on a pool-bottom-area basis.
Best for Larger inground or above-ground pools wanting Beatbot's full 5-in-1 surface, floor, wall, waterline and clarification coverage.
Sources
- Beatbot AquaSense 2 Pro product page (specs table and FAQ), beatbot.com, 2026 (verified 2026-07-04)
- Beatbot AquaSense 2 Ultra product page, specifications section, beatbot.com, 2026 (verified 2026-07-05)