Beatbot AquaSense 2 vs Beatbot AquaSense 2 Pro
Both models on one scale, every figure traced to its manufacturer datasheet. Bar length means the same thing here as on every other page of the site.
- AquaSense 2
- AquaSense 2 Pro
- Pool capacitymore is better
- 3,230sq ft3,875sq ft
- AquaSense 2: Published as Recommended Pool Size of 300 square meters (3,230 square feet), specified on a pool bottom area basis in the official spec table.
- AquaSense 2 Pro: Recommended pool size (pool bottom area): 360 square meters (3,875 square feet)
- Runtimemore is better
- Not publishedNot published
- AquaSense 2: Beatbot publishes up to 4 hours of continuous floor cleaning from the 10,000 mAh battery, a floor only measurement basis, not a whole pool runtime covering walls and waterline, so no comparable runtime value is charted.
- AquaSense 2 Pro: General cleaning runtime is not published; Beatbot publishes only an up-to-11-hours continuous surface cleaning claim, a different basis than a whole-pool runtime, so no comparable runtime figure exists
- Flow ratemore is better
- 5,500GPH5,500GPH
- AquaSense 2: Published as 5,500 GPH suction, but Beatbot's own footnote states 5500 GPH was the highest rate tested in Beatbot's internal labs and actual results may vary, so this is a peak internal lab figure, not a rated continuous flow.
- AquaSense 2 Pro: 5500 GPH is the highest rate tested in Beatbot's internal labs; real-world flow varies
- Filtration (finest layer)less is better
- 150µm150µm
- AquaSense 2: FAQ states a 150 um filter capturing leaves, hair, sand, and insects; spec table lists a 2 L filter basket. Two FAQ entries describe it inconsistently as single layer and as two layer, both at 150 um.
- AquaSense 2 Pro: Two-layer filter (150um + 250um), captures particles as small as 150 micrometers; 3.7 L filter basket capacity
- Charge timeless is better
- 4hr4.5hr
- Warrantymore is better
- 3yr3yr
Neither maker publishes a comparable figure.
Beatbot AquaSense 2
A cordless cleaner that covers floor, walls, and waterline in pools up to 3,230 sq ft and backs it with a 3 year full replacement warranty. Its headline 4 hour runtime applies to continuous floor cleaning only, and the 5,500 GPH suction figure is a peak internal lab number by Beatbot's own footnote.
Best for Large inground pools needing cord free wall and waterline scrubbing.
Beatbot AquaSense 2 Pro
A five-mode flagship that cleans floor, walls, waterline and surface, then parks itself at the waterline for easier retrieval. Built for large pools where full coverage matters more than price.
Best for large pools where full floor-walls-waterline-surface coverage matters.
Sources
- AquaSense 2 product page, specifications comparison table and FAQ, beatbot.com, 2026 (verified 2026-07-05)
- Beatbot AquaSense 2 Pro product page (specs table and FAQ), beatbot.com, 2026 (verified 2026-07-04)